Operation Guide
1.The Periodicity trial operation is necessary for standby generator sets.
2.Firstly finish all the inspection work before starting.
3.Connect the battery to the genset, first with positive pole, then with negative pole
4.Start diesel genset from the controller
5.Check the unnormal noise or vibration of the genset
6.Check if there is leakage problem for the three liquid( coolant, fuel and oil) & air exhaust system have leakage phenomenon.
7.Check if there is any unusual indication for the meter of control system.
8.Check the output voltage and frequency from the control screen
9.Every starting, stopping or one hour running, record the operating parameter of the genset one time.
10.Keep the load of genset without exceeding Rated value.
11.Check whether the gensets can start automatically after get a signal from ATS.
12.Start the synchronization function once the gensets working smoothly.
Product Catalog
湖北十一选五走势图 钱盈配资 福建快三 富贵王国 41号独行侠 南京麻将 贵州快3 5分彩怎么看号 a片乱伦电影 太原沐足堂有没有飞机 安卓美女麻将 宁夏11选5走势图一定牛 广东十一选五走势一 一本道午夜成人电影 尤洛卡股票 上海十一选五爱乐彩